|
IN ICM
(Isolating Clock Module for 2100-M)
Description.
The IN-ICM is designed for use
with the 2100-M Multiplexer, where isolation between the Clock and
Reset control module and the Clock and Reset on the 2100-M is
required. |
|
| Ordering
Information. |
|
|
IN-ICM-230VAC |
230Vac Input - Standard Model. |
| IN-ICM-115VAC |
115Vac Input. |
| IN-ICM-24V |
24Vac/dc Input. |
| IN-ICM - Specifications |
| IN-ICM-230Vac |
Input |
230Vac ±10%. |
|
Hysterisis |
75Vac Typical. |
|
Current |
23mAac per Input Typical @ 230Vac. |
| IN-ICM-115Vac |
Input |
115Vac ±10%. |
|
Hysterisis |
40Vac Typical. |
|
Current |
23mAac per Input Typical @ 115Vac. |
| IN-ICM-24V |
Input |
24Vac/dc ±10%. |
|
Hysterisis |
8Vac/10Vdc Typical. |
|
Current |
23mAac/dc per Input Typical @ 24V. |
| Output |
Open Collector, 30V @ 100mA Maximum. |
| Isolation |
1.5kVac/dc Input to Output for 60sec. |
| EMC Emmisions Compliance |
EN 55022-A. |
| EMC Immunity Compliance |
EN 50082-1. |
| Safety Compliance |
EN 60950. |
| Operation Temperature |
0~60C. |
| Storage Temperature |
-20~80C. |
| Operating Humidity |
90%RH Max. Non-condensing. |
| Construction |
6.6 Polyamide Thermoplastic Rail Mount
Enclosure. |
| Note 1.
Specification based on Standard Calibration Units, unless
otherwise specified. |
| Note 2.
Due to ongoing research and development, designs,
specifications, and this documentation are subject to change
without notification. |
|
No liability will be accepted
for errors, ommisions or amendments to this
specification. |
|
|
|
CAUTION: |
- Dangerous voltages may be
present. The IN-ICM has no user serviceable
parts.
- Protective enclosure only
to be opened by qualified personnel.
- Remove ALL power sources
before removing protective cover.
|
| |
|
| Quality Assurance
Programme. |
| The modern technology and strict procedures
of the ISO9001 Quality Assurance Programme applied during design,
development, production and final inspection grant the long term
reliability of the
instrument. | |
